Cat.No ACMA00032920
- Description
- Application
- Features And Benefits
This is a pressure filtration device used for aseptic filtration or clarification of medium, aqueous solutions and solvent mixtures. For media containing serum and solutions that are difficult to filter, a device with a pre-filter is available.
For sterile filtration or clarification of media, aqueous solutions and solvent mixtures
Good chemical compatibility and excellent quality
| Bubble Point | Min. value with water 3.2 bar (46 psi) |
|---|---|
| Burst Pressure | Min. value 5.0 bar (72.5 psi) |
| Delivery Condition | Sterile |
| Diameter | 61 mm |
| Dimensions | Housing 61 x 63 mm |
| Effective Filtration Area | 20 cm2 |
| Flow Rate Range | ≥ 400 mL/min at 1 bar |
| Hold Up Volume | 1 mL before bubble point |
| Inlet Connector | Female Luer-Lock |
| Material | Housing Polycarbonate (PC) Membrane Polyethersulfone (PES) |
| Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
| Outlet Connector | Male Luer-Lock |
| Packaging | Single pouch packed |
| Pack Size | 0.2 µm |
| pH | 1.0 - 10.0 |
| Pressure Range | 4 bar |
| Sterilization | Ethylene oxide |
| Temperature | Maximum Allowable Working Temperature 50 °C (122 °F) |
| Total Through Put | Up to 5 L |
| Type | Pressure Filters |
| Wettability | Hydrophilic |