• 24 hours a day, from Monday to Sunday.


Filtration, separation and purification

Trusted Partner

Trusted Partner

Biotechnology, medical and laboratory

Certified Company

Certified Company

ISO 9001:2015 Certification

Prefilter and Polyethersulfone Pressure Filter Type2

Cat.No    ACMA00032923
  • Description
  • Application
  • Features And Benefits

This product is a pressure filter with a pre-filter and 0.45 µm polyethersulfone designed for clarifying high particle load solutions. There is a hose barb inlet and a hose barb outlet. The product is delivered non-sterile

This is a ready-to-use pressure filter unit for the prefiltration of 100 mL to 10 L particle-high-loaded solutions.

Good chemical compatibility and excellent quality

Bubble Point Min. value with water 1.6
Burst Pressure Min. value 5.0 bar (72.5 psi)
Color (Membrane) Clear
Delivery Condition Non-Sterile
Diameter 61 mm
Dimensions Housing 61 x 63 mm
Effective Filtration Area 20 cm2
Flow Rate Range ≥ 600 mL/min at 1 bar
Hold Up Volume 1.2 mL before bubble point
Inlet Connector Hose Barb 6-12 mm Stepped
Material Housing Polycarbonate (PC)
Prefilters Quartz Microfibers
Membrane Polyethersulfone (PES)
Non-Fiber Releasing This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Outlet Connector Hose Barb 6-12 mm Stepped
Packaging Bulk pouch packed
Pack Size 0.45 µm
pH 1.0 - 10.0
Pressure Range 4 bar
Temperature Maximum Allowable Working Temperature 50 °C (122 °F)
Total Through Put Up to 10 L
Type Pressure Filters
Wettability Hydrophilic

Our products and services are for research use only and cannot be used for any clinical purpose.