- Description
- Application
- Features And Benefits
This product is a pressure filter with a pre-filter and 0.45 µm polyethersulfone designed for clarifying high particle load solutions. There is a hose barb inlet and a hose barb outlet. The product is delivered non-sterile
This is a ready-to-use pressure filter unit for the prefiltration of 100 mL to 10 L particle-high-loaded solutions.
Good chemical compatibility and excellent quality
Bubble Point | Min. value with water 1.6 |
---|---|
Burst Pressure | Min. value 5.0 bar (72.5 psi) |
Color | (Membrane) Clear |
Delivery Condition | Non-Sterile |
Diameter | 61 mm |
Dimensions | Housing 61 x 63 mm |
Effective Filtration Area | 20 cm2 |
Flow Rate Range | ≥ 600 mL/min at 1 bar |
Hold Up Volume | 1.2 mL before bubble point |
Inlet Connector | Hose Barb 6-12 mm Stepped |
Material | Housing Polycarbonate (PC) Prefilters Quartz Microfibers Membrane Polyethersulfone (PES) |
Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
Outlet Connector | Hose Barb 6-12 mm Stepped |
Packaging | Bulk pouch packed |
Pack Size | 0.45 µm |
pH | 1.0 - 10.0 |
Pressure Range | 4 bar |
Temperature | Maximum Allowable Working Temperature 50 °C (122 °F) |
Total Through Put | Up to 10 L |
Type | Pressure Filters |
Wettability | Hydrophilic |