Cat.No ACMA00033100
- Description
- Application
- Features And Benefits
Hydrophobic PTFE membrane for nonpolar liquids and gases. Highly resistant to solvents, acids and bases.
Note: The membrane can be wetted with water by rinsing with alcohol and subsequently with water.
Not a medical device / Not an IVD product
For clarification or sterile filtration of liquids or gases, as well as for sample preparation for use in HPLC, GC, ICP, AAS, TOC, DOC, IR, NMR, photometry, spectroscopy, etc.
Autoclavable: Yes. Non-sterile
Non-coloured, pure compacted PP housing with good chemical resistance, very low extractable substances content and low bleeding. With imprint for quick and easy identification of membrane type, diameter and pore size.Autoclavable at 121 °C and 1.1 bar for 30 min.
| Dead Volume | ~80 µl |
|---|---|
| Diameter | Housing 30 mm |
| Effective Filtration Area | 4.9 cm2 |
| Inlet Connector | Luer lock connector |
| Material | (housing) PP |
| Operating Temperature | 55 °C |
| Outlet Connector | Luer connector |
| Pore Dimensions | 0.20 µm,0.45 µm,1.0 µm |
| Pressure Range | 12 bar |
| Quantity | 100 unit(s),400 unit(s) |
| Sterility | Non-sterile |
| Temperature | Autoclavable at 121 °C and 1.1 bar for 30 min. |
| Type | Xtra PTFE-20/25 |
| Volume | 5-100 mL (sample) |
| Wettability | Hydrophobic |