Cat.No ACMA00033093
- Description
- Application
- Features And Benefits
Hydrophobic PTFE membrane for nonpolar liquids and gases. Highly resistant to solvents, acids and bases. Non-sterile.
Note: The membrane can be wetted with water by rinsing with alcohol and subsequently with water.
Not a medical device / Not an IVD product
For clarification or sterile filtration of liquids or gases, as well as for sample preparation for use in HPLC, GC, ICP, AAS, TOC, DOC, IR, NMR, photometry, spectroscopy, etc.
Autoclavable: Yes. Non-sterile
Compacted PP housing with very low extractable substances content and good chemical resistance.Autoclavable at 121 °C and 1.1 bar for 30 min.
| Dead Volume | ~35 µl/~5 µl/~80 µl |
|---|---|
| Diameter | Housing 25 mm/6 mm/30 mm |
| Effective Filtration Area | 1.6. 0.07. 4.9 cm2 |
| Inlet Connector | Luer lock connector |
| Material | (housing) PP |
| Outlet Connector | Mini-Spike |
| Pore Dimensions | 0.45 µm,0.20 µm, |
| Pressure Range | 6 bar |
| Quantity | 100 unit(s) |
| Sterility | Non-sterile |
| Temperature | Autoclavable at 121 °C and 1.1 bar for 30 min. |
| Type | O-20/15 MS |
| Volume | 1-5 mL (sample)/≤1 mL (sample)/5-100 mL (sample) |
| Wettability | Hydrophobic |
| Working Temperature | 55 °C |