- Description
- Application
Syringe Filter with chemically inert hydrophobic PTFE is suitable for venting as well as harsh (Sample) Solvents with a pH of 1 - 14. Type 17574 with a pore size of 0.45 µm can be used for sample preparation. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The low-binding PTFE membrane is the best option for leachable free filtration whenever highest chemical compatibility and pH values of 1 - 14 are needed. For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids. Due to the hydrophobic nature Minisart SRP can also be used for venting. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh (Sample) Solvents, acids and bases.
| Bubble Point | Min. value with ethanol 0.9 bar (13 psi) |
|---|---|
| Burst Pressure | Min. value 7.0 bar (102 psi) |
| Color | (Membrane) White (opaque) |
| Cytotoxicity | According to ISO 10993-5 |
| Delivery Condition | Non-Sterile |
| Diameter | ⌀ 15 mm |
| Dimensions | Housing 25 × 23 mm |
| Effective Filtration Area | 1.7 cm2 |
| Extractables | HPLC certified |
| Flow Rate Range | 150 mL/min with methanol at 1 bar (14.5 psi) | 1600 mL/min with air at 0.1 bar (1.5 psi) |
| High Flow | No |
| Hold Up Volume | 30-100 µL before bubble point |
| Inlet Connector | Female Luer Lock |
| Material | Housing Polypropylene (PP) Membrane Polytetrafluorethylene (PTFE) |
| Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
| Outlet Connector | Male Luer Slip |
| Packaging | Bulk pouch packed |
| Pack Size | 50 |
| pH | 1.0 - 14.0 |
| Pore Dimensions | 0.45 µm |
| Pressure Range | Max 4.5 bar (65 psi) |
| Sterilization | Ethylene oxide Autoclave, 121°C, 30 min |
| Temperature | Maximum Allowable Working Temperature 121 °C (250 °F) |
| Total Through Put | Up to 15 mL |
| Type | Syringe Filters |
| Wettability | hydrophobic |