- Description
- Application
Air syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows filtration or venting under non-sterile conditions. The low-binding PTFE membrane is the best option for leachable free filtration. Due to its hydrophobic nature the PTFE membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test. It is glueable, e.g. to tubing, what enables assembly and sterilization by the user. Housing and membrane are tightly connected which allows bidirectional use.
It is suitable for glueing and assembly to tubing.
Bubble Point | Min. value with ethanol 0.95 bar (14 psi) |
---|---|
Burst Pressure | Min. value 7.0 bar (102 psi) |
Color | (Membrane) Yellow |
Cytotoxicity | According to ISO 10993-5 |
Delivery Condition | Non-Sterile/Ethylene Oxid |
Diameter | ⌀ 15 mm |
Dimensions | Housing 25 × 23 mm/25 × 72 mm |
Effective Filtration Area | 1.7 cm2 |
Flow Rate Range | 2000 mL/min with air at 0.1 bar (1.5 psi) |
High Flow | No |
Hold Up Volume | 100-230 µL before bubble point |
Inlet Connector | Female Luer Lock |
Material | Housing Acrylic-based multipolymer compound (MBS) Membrane Polytetrafluorethylene (PTFE) |
Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
Outlet Connector | Male Luer Slip |
Packaging | Bulk pouch packed/Single blister packed |
Pack Size | 50/500 |
Pore Dimensions | 0.2 µm |
Pressure Range | Max 4.5 bar (65 psi) |
Sterilization | Ethylene oxide Gamma irradiation |
Temperature | Maximum Allowable Working Temperature 60 °C (140 °F) |
Total Through Put | Up to 100 mL |
Type | Syringe Filters |
Wettability | hydrophobic |