- Description
- Application
Syringe Filter with hydrophobic polyethersulfone (PES) is suitable for venting or filtration of gases and air. Type 1757G with a pore size of 0.2 µm can be used for sterile filtration and has a hose barb inlet and outlet. Version K is a non-sterile pack of 50. Units can be sterilized by gamma irradiation, autoclaving or EO.
This reduces waste and makes the handling easier whenever the application allows venting under non-sterile conditions. In addition the non-sterile filters can be assembled and sterilised by the user. The hydrophobic PES membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of gamma-sterilisable PP (polypropylene) which is compatibility with harsh gases.
| Bubble Point | Min. value with ethanol 0.95 bar (14 psi) |
|---|---|
| Burst Pressure | Min. value 7.0 bar (102 psi) |
| Color | (Membrane) White (opaque) |
| Cytotoxicity | According to ISO 10993-5 |
| Delivery Condition | Non-Sterile |
| Diameter | 25 mm |
| Dimensions | Housing 33 × 36 mm |
| Effective Filtration Area | 4.8 cm2 |
| Flow Rate Range | 1200 mL/min with air at 0.1 bar (1.5 psi) |
| High Flow | No |
| Hold Up Volume | 100-200 µL before bubble point |
| Inlet Connector | Hose Barb 4-6 mm Stepped |
| Material | Housing Polypropylene (PP) |
| Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
| Outlet Connector | Hose Barb 4-6 mm Stepped |
| Packaging | Bulk pouch packed |
| Pack Size | 50 |
| pH | 3.0 - 14.0 |
| Pore Dimensions | 0.2 µm |
| Pressure Range | Max 4.5 bar (65 psi) |
| Sterilization | Ethylene oxide Gamma irradiation Autoclave, 121°C, 30 min |
| Temperature | Maximum Allowable Working Temperature 121 °C (250 °F) |
| Total Through Put | Up to 100 mL |
| Type | Syringe Filters |
| Wettability | hydrophobic |